ORTUR Laser Engraver Cutter Wood Cutting Engraving DIY Machine Rotary Roller Metal Glass Leather Acrylic MDF Air Assist Nozzle

Features

Engraving Area:400MM×400MM

Wave Length:445±5nm

Focus:Fixed Focus

Default Focal Length:50mm (from the heat sink to the object)

Control Mode:PWM

Power Rate:S0-S1,000

Engraving Speed:0-15000MM/Min

Baud Rate:115200 – 921600 (Default: 115200)

Computer OS:Win XP, Win 7, Win 8, Win 10 (LaserGRBL),Mac and Linux (LightBurn)

Control Softwares:LaserGRBL (free), LightBurn (Paid Software)

Input Format:JPG, JPEG, PNG, BMP, SVG, etc.

Available Materials of Engraving:Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc.

Available Materials of Cutting:Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc.

Input Voltage:110V-220V (Compatible)

Power Adapter Output:24V / 2A

Operating Temp:-20℃-50℃

SAFETY PROTECTION SYSTEM:

Flame Detector & Buzzer Alarm: When the laser engraver detects flame, it will automatically stop and beep.Emergency Stop: There is a switch for emergency stop. Once there is a emergency in the process of engraving, you can press the emergency stop switch to stop engraving.Active

Position Protection: There is a G-sensor on the motherboard. Once the laser engraver detects unauthorized movement, the laser beam will stop.

Laser Beam Safety Guard: If your computer system halted or USB cable disconnected and then the laser engraver stops moving, the laser beam will stop to prevent fire.

Exposure Duration Detection and Limitation: Once the laser cutter is under control but the users forget to operate it, the motor will stopped working. And then the laser beam will stopped after a while to prevent fire.

Power Control System: Once the laser engraver disconnect to the power, it would cut the power to the laser module.

New Eye Protection Design: Adopts newly laser protective cover, the ORTUR laser engraving machine can filter out 98% UV light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles.

UPGRADE MOTHERBOARD:

1. Specialized Motherboard with 32Bits MCU. It could pre-process 32 instructions, support baud rate as high as 921600, which is much more powerful!

2. The Most Advanced 32Bits Laser Engraver Firmware-ORTUR laser master firmware, smarter, faster, higher precision and easier to use.

3. Laser power range could be S0 – S1000, compared to 8Bits desktop laser engravers, which only has S0 – S255, ORTUR Laser Master could control laser beam more accurately, could even use the high power laser unit to "draw" a picture on paper , that the 8Bits high power laser engravers could not do.